- Home
- Products
- Copper Alloy
- Copper Nickel Alloy
- CuNi1 Resistance Alloy
CuNi1 Resistance Alloy
Introduction
CuNi1 resistance alloy is a type of copper nickel binary alloy with low temperature coefficient of resistance and a maximum operating temperature of 200°C. This alloy is mainly used to produce low voltage circuit breaker, low temperature electric blanket, thermal cutout and other low voltage electrical devices.
| Type | Size | ||
| Round wire | D=0.06mm~8mm | ||
| Flat wire | W=0.4~40mm | T=0.05~2.9mm | |
| Strip | W=8~200mm | T=0.1~3.0mm | |
| Foil | W=6~120mm | T=0.005~0.1mm | |
| Rod | Dia=8~100mm | L=50~1000mm | |
| Nickel | 1 |
| Manganese | - |
| Copper | 99 |
| Yield strength (Mpa) | Tensile strength (Mpa) | Elongation (%) | Density (g/cm3) | Resistivity (20℃) (Ω・mm2/m) | Resistance temperature coefficient (20℃~600℃) 10-5/℃ | Conductivity (20℃) (WmK) | Electromotive force against copper (μV/℃ ) (0~100℃) | Expansion coefficient (20 ℃- 400℃) x10-6/K | Specific heat capacity (20℃) (J/g・K) | Melting point (℃) | Max.operating temperature (℃) | Magnetism |
| 90 | 210 | 25 | 8.9 | 0.03 | ＜100 | 145 | -8 | 17.5 | 0.38 | 1085 | 200 | Non magnetic |
| Atmospheric corrosion resistance at 20℃ | Corrosion resistance at maximum operating temperature | ||||
| Air and other oxygen-containing gases | Ammonia containing gas | Sulfurous gas | Sulfurous gas | Carburization | |
| (oxidizability) | (reducibility) | ||||
| Good | Poor | Poor | Poor | Poor | Good |
Index
alloy strip, resistance wire
OHMALLOY Material Co.,Ltd.
Office Add.: T3-1108，Lane 699, Tongji Road, Baoshan District, Shanghai
Factory Add.: No 126, Jincheng Road, Xindeng, Fuyang,Hangzhou City, Zhejiang Province
Tel.: +86-21-66796338
Fax: +86-21-66796339
Mobile: +86-13795230939
Email: sales@ohmalloy.com
WhatsApp: +86-13795230939